Nanometer to Inch: nm to in / in to nm conversion


Usage: (1) Enter the value and tab out or click Convert. (In Detail)

From
To
Digit Separation
Round To*
Centimeter
cm
Inch
in

Result:

* Rounding may affect the result of very small decimal values. If you are expecting small decimal value, then please select 8 Decimals or higher option in the Round To field.

Using The Nanometer to Inch Unit Converter

  1. Enter the from unit value, either Nanometer or Inch.
  2. Either tab out or press Convert button.
  3. The result will be shown in the result section.
  4. By default, the decimal rounding option is set to Do Not Round. If you want the decimals of the result values to be rounded? Then, select the decimal numbers to be rounded from the Round To drop down list.
  5. You can swap the Nanometer (nm) and Inch (in) units by pressing the the Swap Units button.

Nanometer(nm) & Inch(in) Conversion Chart

Generating And Printing The Nanometer(nm) & Inch(in) Conversion Chart

  1. Select the Distance/Length conversion you want to perform from the drop down box Conversion Type. You can convert from Nanometer to Inch and vice versa.
  2. Select the decimal place rounding in the Rounding drop down. By default, this converter uses 12 decimal places.
  3. Enter the Starting Distance you desire to start the conversion chart.
  4. Enter the Interval between the distance. Example: -100, -10, 0.25, 0.5, 1, 10, 100, etc...
  5. Click the Generate Chart button to generate your desired chart.
  6. Click the Print button to print the chart you have generated. This printing option allows you to print only the chart portion.

Conversion Type
Round To
Digit Separation
Start. Value
nm
Increment
nm
 
Nanometer Inch
1nm 0.00000003937in
2nm 0.00000007874in
3nm 0.00000011811in
4nm 0.00000015748in
5nm 0.00000019685in
6nm 0.00000023622in
7nm 0.000000275591in
8nm 0.000000314961in
9nm 0.000000354331in
10nm 0.000000393701in
11nm 0.000000433071in
12nm 0.000000472441in
13nm 0.000000511811in
14nm 0.000000551181in
15nm 0.000000590551in
16nm 0.000000629921in
17nm 0.000000669291in
18nm 0.000000708661in
19nm 0.000000748031in
20nm 0.000000787402in
21nm 0.000000826772in
22nm 0.000000866142in
23nm 0.000000905512in
24nm 0.000000944882in
25nm 0.000000984252in
Nanometer Inch
26nm 0.000001023622in
27nm 0.000001062992in
28nm 0.000001102362in
29nm 0.000001141732in
30nm 0.000001181102in
31nm 0.000001220472in
32nm 0.000001259843in
33nm 0.000001299213in
34nm 0.000001338583in
35nm 0.000001377953in
36nm 0.000001417323in
37nm 0.000001456693in
38nm 0.000001496063in
39nm 0.000001535433in
40nm 0.000001574803in
41nm 0.000001614173in
42nm 0.000001653543in
43nm 0.000001692913in
44nm 0.000001732283in
45nm 0.000001771654in
46nm 0.000001811024in
47nm 0.000001850394in
48nm 0.000001889764in
49nm 0.000001929134in
50nm 0.000001968504in
Nanometer Inch
51nm 0.000002007874in
52nm 0.000002047244in
53nm 0.000002086614in
54nm 0.000002125984in
55nm 0.000002165354in
56nm 0.000002204724in
57nm 0.000002244094in
58nm 0.000002283465in
59nm 0.000002322835in
60nm 0.000002362205in
61nm 0.000002401575in
62nm 0.000002440945in
63nm 0.000002480315in
64nm 0.000002519685in
65nm 0.000002559055in
66nm 0.000002598425in
67nm 0.000002637795in
68nm 0.000002677165in
69nm 0.000002716535in
70nm 0.000002755906in
71nm 0.000002795276in
72nm 0.000002834646in
73nm 0.000002874016in
74nm 0.000002913386in
75nm 0.000002952756in
Nanometer Inch
76nm 0.000002992126in
77nm 0.000003031496in
78nm 0.000003070866in
79nm 0.000003110236in
80nm 0.000003149606in
81nm 0.000003188976in
82nm 0.000003228346in
83nm 0.000003267717in
84nm 0.000003307087in
85nm 0.000003346457in
86nm 0.000003385827in
87nm 0.000003425197in
88nm 0.000003464567in
89nm 0.000003503937in
90nm 0.000003543307in
91nm 0.000003582677in
92nm 0.000003622047in
93nm 0.000003661417in
94nm 0.000003700787in
95nm 0.000003740157in
96nm 0.000003779528in
97nm 0.000003818898in
98nm 0.000003858268in
99nm 0.000003897638in
100nm 0.000003937008in

Reference


Disclaimer: We took every effort to provide higher level of accuracy in the calculators, converters and tools we have added to www.MyTecBits.com Tools section. But, we cannot give any guarantee or can be held responsible for any errors, defects, faults or mistakes in any of the calculators, converters or tools. Please see detailed terms of use and liability disclaimer in Terms of Use Page.